Skip to main content

How to use Precis GNSS RTK boards to establish ground control points for an aerial site surveys to achieve accurate northing/easting/elevation coordinates in AutoCAD Civil 3D?

How can I use your equipment to establish ground control points for an aerial site surveys to achieve accurate northing/easting/elevation coordinates in AutoCAD Civil 3D? Do I need setup my base station then go to my GCP's and mark then go to the next GCP and so on? Do I need an internet connection to gather the data? 

A base must be set up in the original point, and the RTK corrections must be transmitted to the rover. After that, the cm-level position of the rover will be available. You can place the rover in the 10-12 GCPs, respectively and get their accurate positions. After that, the northing/easting/elevation can be calculated.

No internet access is needed to get the accurate positions of the rover. The corrections can be transmitted from the base to the rover via a radio, which is included in our kit.

Contact us: info@tersus-gnss.com
Labels:

Comments

Post a Comment

Popular posts from this blog

Tersus Geomatics Office - Static Surveying - Data Processing

Tersus Geomatics Office is integrated office software to manage and process data for NeoRTK, the RTK survey receiver. It is laid out with visualized toolbars and logical icons to easily handle GNSS data processing, baseline processing and network adjustment, etc. It is the software set to import, update and analyze data effectively.  Watch the video to know how to do data processing after static surveying data collection with NeoRTK.  Learn more, click here .  Inquiry, click here . 
3 comments
Read more

How to Use Oscar to Collect Static Data for A Given Length of Time

Usually, we need to collect static data for a given length of time, for example, 2 hours. In the past, the surveyor had to record the start time and keep an eye on the clock all the time. The function of setting the static collection duration in Oscar GNSS Receiver can solve this problem. When setting the static survey, the surveyor only needs to enter the duration time, then start it, and no more attention will be required. When the time is up, Oscar will automatically stop recording, with no fewer or more data. Now we show you how to set the Oscar static collection duration on the OLED display of Oscar. 1. Turn on the Oscar, press the Power ON/OFF button and Function (FN) button, and go to Mode Config -> Static. The default option of Static is OFF, and you can press the Function (FN) button to switch it to “Auto” or “Manual”. 2. Go to Duration to set the collection time, for example, 120 minutes. 3. Set other options, then choose “Confirm”, and it will start to collect st...
Post a Comment
Read more

What is CORS network? How to connect to CORS network with external Bluetooth module and mobile phone?

A CORS is a Continuously Operating Reference Station. The CORS is an appealing way to do RTK due to its convenience and large coverage area. While Tersus Precis-BX305 currently does not support build-in NTRIP client feature. An alternative way to connect CORS network is employing external Bluetooth module and a cellphone. Here is a detailed procedure about how to connect to CORS Network with Precis-BX305 board.  Demonstration of connecting Precis BX305 to CORS Network Hardware & Software Requirement Precis-BX305 GNSS antenna GNSS antenna cable  External Bluetooth module Bluetooth cable Cell phone (android system) 5V DC charger Software required Ntrip client (free android apps)    Connect to CORS Network Please follow below steps.  Connect GNSS antenna to Precis-BX305. Connect external Bluetooth module to either COM1 or COM2 of the board Connect to power supplier and plug in/turn on the power Turn on the Bluetooth of the mobil...
Post a Comment
Read more